[REPU] Board Post Reply: 91 Mazda 2600I Bed Vibration

From: forum@mazdarepu.com
Date: Fri Oct 11 2002 - 09:12:06 PDT


A New Post has Been made to the thread [91 Mazda 2600I Bed Vibration]
The Reply was:

You seem to have addressed all the main problem areas. Wait till you get the leafs. After you install them if you still get vibration maybe the shaft needs to be balanced. Or you could check the transmission mounts. Maybe it your tires. If not just bite the bullet and take it to a shop, prefferably someone you know and have it looked at. I did the same drop on My 90 B2600i and I never had any problems, except that the aluminum drop blocks Broke once.

-----------------------------------------------------------
DO NOT REPLY TO THIS EMAIL!!

  Log into http://http://www.mazdarepu.com/board
Go Here to Reply: http://www.mazdarepu.com/board/viewthread.php3?FID=8&TID=260
 
-----------------------------------------------------------
Mazda Rotary Engine Pickup List http://mazdarepu.com
To get off the list send an email to majordomo@mazdarepu.com
-----------------------------------------------------------



This archive was generated by hypermail 2.1.1 : Mon Jan 27 2003 - 00:00:12 PST